Loading
You have waterproofed the terrace twice. Changed the tiles. Used quality coating. Even spent extra for professional water proofing treatment on terrace slabs. Yet, a few weeks into the monsoon, there it is again. Damp patches on the ceiling, peeling paint, or worse, water dripping right into your living room. What is going wrong? There must be a deeper reason why waterproofing of terrace keeps failing?
Here’s Why Terrace Leaks Keep Coming Back
Most waterproofing failures on terraces happen not because the product is bad, but because of how water behaves on horizontal surfaces. Terraces are flat, exposed areas. They bear the full impact of rain, temperature swings, UV rays, and foot traffic. This is why it matters:
1. Water Accumulates and Seeks the Weakest Point
Even a tiny depression on the surface or poor slope can cause water to stagnate. Standing water is your worst enemy. It slowly seeps into the micro-cracks in the slab, especially near joints, pipe outlets, or tile gaps. Over time, this water travels through the structure, resulting in seepage and leakage not just on the terrace but also inside your walls. This causes problems that no surface-level coating alone can stop.
2. Thermal Movement Creates Invisible Cracks
Terraces expand in the heat and contract at night or during rains. This repeated thermal movement creates hairline cracks on the surface. Even the most elastic waterproofing material can fail if it does not adapt to this structural movement.
3. Wrong Product for the Right Job
A lot of people end up using bathroom or wall waterproofing products on their terrace. But terraces face much harsher conditions like direct sun, heavy rain, and standing water. That’s why they need a special water proofing treatment on terrace for flat and open areas. Products meant for walls just cannot handle the kind of wear and tear terraces go through, which leads to cracks, peeling, and eventually leakage all over again.
4. Poor Surface Preparation
Dust, efflorescence, moisture, or old chemical residues on the surface can prevent adhesion. If your contractor did not clean, dry and prime the surface properly before applying the waterproofing system, expect failure within a season or two.
What You Need Is Not Just Waterproofing of Terrace
The solution is not just to re-coat the terrace. You need a waterproofing system that is:
ü Highly flexible to withstand surface expansion and contraction caused by temperature changes without cracking or breaking down over time.
ü UV and weather resistant built to endure harsh sunlight, rain, and varying weather conditions without losing its effectiveness or peeling off.
ü Capable of forming a continuous, crack-bridging layer that covers hairline cracks and prevents water from seeping through weak spots.
ü Made specifically for horizontal surfaces to handle water stagnation, foot traffic, and structural stress unique to flat, open areas like terraces and balconies.
The Solution: Birla White Seep Guard Horizontal Surfaces
Designed for roofs and terraces, Birla White Seep Guard Horizontal Surfaces provides a complete solution for long-term protection.
|
Provides waterproofing protection of up to 7 bars of positive and negative hydrostatic pressure. |
Ensures strong adhesion to RCC and concrete surfaces due to its white cement base. |
Offers excellent crack-bridging flexibility with German elastomeric polymers to withstand thermal movement. |
Once terrace seepage sets in, it often leads to internal issues like damp walls and paint failure. If you are also looking for a solution for water leakage from wall, Birla White Seep Guard can be used for the terrace for complete protection. Waterproofing and dampproofing should never be treated as one-size-fits-all. If your waterproofing keeps failing, it is not just about redoing it. It’s about doing it right, with the right product. Explore Birla White Seep Guard Horizontal Surfaces and give your home the shield it deserves. For more information on waterproofing solutions, visit www.birlawhite.com.
