Question 1

What are the main constituents of Seep Guard Vertical Surfaces?

Accepted Answer

Seep Guard Vertical surfaces is made up of Unique Composition of White Cement & flexible grade waterproofing polymers.

Question 2

What form and colour are Seep Guard Vertical Surfaces available in?

Accepted Answer

Seep Guard Vertical Surfaces is a white dry mix in powder form, and it comes white in colour.

Question 3

Can Seep Guard Vertical Surfaces be used for both fresh construction and repair/renovation work?

Accepted Answer

Yes, it can be applied on various surfaces i.e. fresh construction/repair/renovation as per SOP.

Question 4

Is there any need for prewetting before the application of Seep Guard Vertical Surfaces?

Accepted Answer

Before applying Seep Guard Vertical Surfaces, the surface should be cleaned with water to remove any contaminants, such as efflorescence, that may interfere with the effectiveness of the coating. This will ensure that the coating can properly adhere to and protect the surface.

Question 5

What is the coverage (Sq. mt) of Seep Guard Vertical Surfaces?

Accepted Answer

Coverage of Seep Guard Vertical Surfaces is 1.30-1.48 Sq Mt/Kg (One Priming coat with 100% dilution + Two Coats with 65% dilution) on ideal surface

Question 6

What packs sizes is Seep Guard Vertical Surfaces available in?

Accepted Answer

Seep Guard Vertical Surfaces is available in SKU size of 15 Kg.

Question 7

What type of surfaces is Seep Guard Vertical Surfaces applied to?

Accepted Answer

Seep Guard Vertical Surfaces is designed specifically for application on exterior plaster or concrete surfaces.

Question 8

What are the different areas of application of Seep Guard Vertical Surfaces?

Accepted Answer

This product is suitable for use on the exterior walls of both bungalows and larger buildings.

Question 9

Can Seep Guard Vertical Surfaces used for interior and exterior?

Accepted Answer

Although this product can be used on both interior and exterior vertical surfaces, the warranty only covers exterior applications.

Question 10

What is the application procedure of Seep Guard Vertical Surfaces for repainting surfaces?

Accepted Answer

Before applying this product, it is important to thoroughly remove any loose debris, dirt, grease, or oil from the surface. The surface should then be washed with clean water and allowed to dry completely. There should be no cracks or visible pores or pinholes on the surface after preparation.

Question 11

Should curing be done after the application of Seep Guard Vertical Surfaces?

Accepted Answer

This product does not require curing after application.

Question 12

How to store Seep Guard Vertical Surfaces?

Accepted Answer

It is important to store the product in a cool and dark place to prevent moisture from entering and affecting its quality.

Question 13

What is the pot life of Seep Guard Vertical Surfaces?

Accepted Answer

The pot life, or the amount of time that the Seep Guard Vertical Surfaces product remains usable after it has been mixed, is 1.5 hours.

Question 14

What is shelf life of Seep Guard Vertical Surfaces?

Accepted Answer

The shelf life of Seep Guard Vertical Surfaces is 09 months.

Question 15

What are the precautions to be observed while applying Seep Guard Vertical Surfaces?

Accepted Answer

It is important to properly prepare the surface before applying Seep Guard Vertical Surfaces. Make sure to remove any loose debris, dirt, grease, or oil from the surface and ensure that it is dry and free of cracks. There should be no visible pores or pinholes on the surface after preparation. The surface temperature should not exceed 35°C. The substrate should also be tested for soundness using a small hammer. Do not apply the product directly to a poorly prepared surface.

Question 16

What is water demand of Seep Guard Vertical Surfaces product?

Accepted Answer

For the priming coat, you will need to mix 100% water with 1 kg of material. For the two coats of Seep Guard Vertical Surfaces, you will need to mix 65% water with 1 kg of material. To prepare the priming coat, add 1000 ml of water to 1 kg of material. To prepare the two coats of Seep Guard Vertical Surfaces, add 650 ml of water to 1 kg of material.

Be ready for the rains, and the compliments.

Seep Guard Vertical Surfaces: Give your home’s exterior a waterproof layer!

What makes Seep Guard the best choice!

Areas of Application

Gallery

Videos

Available Sizes

Product Brochure

Warranty Guide

Your questions, Now answered!

Find a store near you

Blogs

Stop Seepage Before It Starts: Everything You Need to Know About Birla White Seep Guard

Your terrace tiles are loose; will terrace waterproofing be the solution before re-tiling?

What is the white fluffy growth on your basement walls, and how do you get rid of it through waterproofing seal?

How do you prevent seepage from walls on your newly plastered walls?

Why is your terrace floor so hot in the summer, and how can you make it cooler?

We promise to give you beautifully white walls.