Loading
The technology used to manufacture this product is ‘Patent Pending’.
Move Fibre Trowel Vertically from top to bottom to get Vertical Textured Finish.
Move Fibre Trowel Diagonally from Right to Left and diagonally Left to Right to get Cross Textured Finish.
Move Fibre Trowel Vertically from top to bottom and Horizontally Left to Right to get Plus Minus Textured Finish.
Move Fibre Trowel Diagonally from top to bottom In Right to Left movement to get Rain fall Textured Finish.
Move Fibre Trowel Vertically from Right to Left or Left to Right movement to get Horizontal Textured Finish.
Move Fibre Trowel in a Random circle or in a swirling movement to get swirly Textured Finish.
Sr.No | Technical Parameter | Specifications | Typical Range | ||
---|---|---|---|---|---|
1 | *Coverage (Sqft/Kg/coat) [On Ideal smooth surface] |
3.5-4.5 | In House | ||
2 | Pot life (Hours) | 1.5-2.0 | In House | ||
3 | Tensile strength (@28 days) (N/mm2) | ≥0.5 | EN 1348 | ||
4 | Water Capillary Absorption (ml), 30 min @28days | ≤0.60 | Karsten Tube | ||
5 | Bulk Density (g/cm3) | 1.3-1.7 | In House | ||
* This value is on smooth surface; however, this may change according to surface texture |
Surface Preparation: Remove all the loosely adhering material like, dirt, dust & oil etc. from the Surface by using suitable emery paper, putty blade or wire brush etc. Surface imperfections such as holes, dents and cracks should be filled before application of Textura Roller/ Spray finish.
Surface Pre-Wetting: Pre-wetting is important before application of “Textura Roller Finish” on concrete/Plaster surface to get best smoothness, workability, coverage & higher bond strength with the applied substrate.
1) Mixing Ratio: Mix 22 to 25 % of Clean water to get uniform paste formation which results in obtaining more coverage & smooth uniform shade. Only prepare a quantity which can be used within 1-2 hours of mixing with water.
2) Application Procedure