Question 1

What are the main constituents of Seep Guard Interior Surfaces?

Accepted Answer

Seep Guard Interior surfaces is made up of Unique Composition of White Cement & flexible grade waterproofing polymers.

Question 2

What form and colour are Seep Guard Interior Surfaces available in?

Accepted Answer

Seep Guard Interior Surfaces is a white dry mix in powder form, and it comes white in colour.

Question 3

Is there any need for prewetting before the application of Seep Guard Interior Surfaces?

Accepted Answer

Before applying Seep Guard Interior Surfaces, the surface should be cleaned with water to remove any contaminants, such as efflorescence, that may interfere with the effectiveness of the coating. This will ensure that the coating can properly adhere to and protect the surface.

Question 4

Can Seep Guard Interior Surfaces be used for both fresh construction and repair/renovation work?

Accepted Answer

Seep Guard Interior Surfaces can be used for various applications including fresh construction, repairs, and renovations, following the SOP.

Question 5

What is the coverage (Sq. mt) of Seep Guard Interior Surfaces?

Accepted Answer

Coverage of Seep Guard Interior Surfaces is 0.92-1.11 Sq. mt/Kg (Two Coats) on ideal surface.

Question 6

What packs sizes is Seep Guard Interior Surfaces available in?

Accepted Answer

Seep Guard Interior Surfaces is available in two different pack sizes: 2 Kg and 10 Kg. This allows you to choose the size that is most suitable for your needs and the amount of surface area you need to cover.

Question 7

What type of surfaces is Seep Guard Interior Surfaces applied to?

Accepted Answer

It is possible to use it in the interior of a building on brick, stone, or hollow concrete block masonry work.

Question 8

What are the different areas of application of Seep Guard Interior Surfaces?

Accepted Answer

It can be also applied on repair/old surface in interior surfaces.

Question 9

Should curing be done after the application of Seep Guard Interior surfaces?

Accepted Answer

There is no need to undergo a curing process after applying Seep Guard Interior Surfaces.

Question 10

How to store Seep Guard Interior Surfaces?

Accepted Answer

It is important to store the product in a cool and dark place to prevent moisture from entering and affecting its quality.

Question 11

What is the pot life of Seep Guard Interior Surfaces?

Accepted Answer

The pot life, or the amount of time that the Seep Guard Interior Surfaces product remains usable after it has been mixed, is 1.5 hours.

Question 12

What is shelf life of Seep Guard Interior Surfaces?

Accepted Answer

The shelf life of Seep Guard Interior Surfaces is 09 months.

Question 13

Why Seep Guard Interior Surfaces can be used for both positive & negative side waterproofing?

Accepted Answer

Seep Guard Interior Surfaces is specially formulated for both positive and negative side waterproofing. It has exceptional tensile adhesion, excellent crack bridging capabilities, and the ability to withstand hydrostatic pressure, making it a highly effective waterproofing solution.

Question 14

What are the precautions to be observed while applying Seep Guard Interior Surfaces?

Accepted Answer

It is not recommended to apply Seep Guard Interior Surfaces directly on surfaces that are dirty, greasy, or oily, or have loose adhesion. The surface should be clean and dry, with no cracks or visible pores or pinholes. It is important to check the substrate for soundness by tapping it with a small hammer before applying the product.

Question 15

What is water demand of Seep Guard Interior Surfaces product?

Accepted Answer

The Seep Guard Interior Surfaces product requires a water to product ratio of 60-65%, which means that for every 1 kg of the product, you should add 600-650 ml of water.

When it pours make sure your indoors stay secure with Seep Guard.

Seep Guard Interior Surfaces: Protect your bathroom from the shower of dampness!

What makes Seep Guard the best choice!

Areas of Application

Gallery

Videos

Available Sizes

Product Brochure

Warranty Guide

Your questions, Now answered!

Find a store near you

Blogs

Stop Seepage Before It Starts: Everything You Need to Know About Birla White Seep Guard

Your terrace tiles are loose; will terrace waterproofing be the solution before re-tiling?

What is the white fluffy growth on your basement walls, and how do you get rid of it through waterproofing seal?

How do you prevent seepage from walls on your newly plastered walls?

Why is your terrace floor so hot in the summer, and how can you make it cooler?

We promise to give you beautifully white walls.