Levelplast
"Curing-free ready-mix plaster" from the house of Birla White
Levelplast
"Curing-free ready-mix plaster" from the house of Birla White
Overview
Birla White Levelplast is the first and one of its kind, white cement-based water-resistant polymer modified curing-free ready-mix Plaster. It gives your walls the best in class compressive strength and tensile adhesion.
Birla White Levelplast is an eco-friendly product and is certified for anti-carbonation properties. With it, you can create wonders with your walls that look ageless for years to come. It is ideal for application on interior and exterior surfaces.
Gallery
Product Highlights
Features
  • Only Curing Free Ready-mix plaster
  • High tensile strength
  • High adhesion strength
  • Higher compressive strength
  • Polymer modified product
  • Low capillary absorption
  • Water-resistant
Benefits
  • Saves labour and time
  • Avoid Cracking of Walls
  • Prevents growth of fungus
  • No water curing required
  • Avoid Water Seepage
Applications
  • Concrete Blocks
  • Mivan
  • ACC
  • Red Bricks*
  • Ceilings
  • Plaster Surfaces

*(Only up to recommended thickness i.e. 25mm, in two layers.)

Technical Specifications
Sr.No Technical Parameters Specifications Test Method
1 *Coverage (Sq ft/Kg) @5 mm thickness [On ideal smooth surface] 1.5-2.0 In House
2 Pot life (Hours) 1.0-1.5 In House
3 Tensile Strength @28 days) (N/mm2) >=0.65 EN 1348
4 Water Capillary Absorption (ml), 30 min @28days <=0.80 Karsten Tube
5 Compressive Strength @28 days) (N/mm2) >=10 EN 1015-11
6 Bulk Density (g/cm3) 1.3-1.7 In House
* The result is based on a smooth surface, however, this may change according to surface texture.
Frequently Asked Questions
Birla White Levelplast is the first and one of its kind, white cement-based water-resistant polymer modified curing-free ready-mix Plaster.
Birla White Levelplast is available in a white, dry, free-flowing powder form
Birla White Levelplast mainly consists of Birla White Cement, high quality curing free polymers, mineral fillers, and specialty chemicals, etc.
Birla White Levelplast can be applied directly on blockwork, brickwork**, concrete, rough plaster and ceilings. Apart from these surfaces, it is also applicable on plaster walls for POP punning.

**(Only up to recommended thickness i.e. 25mm, in two layers.)
No, Birla White Levelplast does not require any water curing. Although, the surface should be pre-wetted prior to its application as it helps provide a strong bond with the substrate.
Yes, it is recommended to use a mechanical stirrer to mix Birla White Levelplast and water for proper and uniform mixing. However, if you don’t have access to a mechanical stirrer, you can mix it manually as well.
For the application process of Birla White Levelplast, a putty blade/spatula, gurmala, plumb bob, and aluminum float is required
It completely depends upon the undulations on the base surface. Generally, two coats are applied, followed by one or two coats of Birla White Wall Care Putty so as to ensure a white, smooth, glossy finish.
Birla White Levelplast can be applied up to a thickness of 20 mm. But it should be applied in layers. Generally, it is recommended to apply in steps, with a maximum thickness of 6 mm per step.
No, Birla White Levelplast is not a substitute of Birla White Wall Care Putty. While the former acts as a Wall Plaster, the latter helps form a base for your paint. You should ideally apply Birla White Levelplast first and follow it up with Birla WallCare Putty for a smooth and glossy finish.
Yes, Birla White Levelplast has a unique formula which makes it suitable for damp walls. However, it is important that the surface is wet properly before its application on the wall. This ensures a higher coverage and a higher adhesion with the surface.
Yes, Birla White Levelplast provides a breathable surface and allows any trapped moisture to escape. This also keeps the wall dry and clean for a longer period of time.
The coverage depends entirely on the surface quality. However, as a generalization, the ideal coverage of Birla White Levelplast is 2.6 sq.mt. / 20 kg for a thickness of 8 mm.
Birla White Levelplast can be the base coat to Birla White Wallcare Putty. Once you finish the surface off with the putty, any type of branded paint is suitable for the wall.
Yes, Birla White Levelplast is a one-of-its-kind material and is suitable for external as well as internal application.
Available Pack Sizes