Loading
Your home has more than just four walls and a roof. It is a space of comfort, memories, and connection. Like any lasting relationship, your bond with your home needs nurturing and care. Therefore, when it comes to beautifying your walls, the first step is proper preparation. That is where Primer plays an essential role.
Think of wall primer as the bridge between your wall and the paint. It forms a strong bond that ensures your paint adheres better, looks brighter, and lasts longer. Without this crucial layer, your wall paint might peel or appear uneven. Moreover, the powerful combination of putty and primer adds to the long life of your walls. Used in the correct sequence, that is, primer, putty and paint, will give a flawless look to your home.
_1.webp)
Sometimes even the best products can fall short if not applied correctly. Let’s look at some common primer application mistakes and how to use primer in the right manner.
Before applying primer, ensure your wall is clean, dry, and free of dust particles. Applying primer to a dirty or damp surface weakens its adhesion power. This leads to patchy or peeling paint. Use a brush or cloth to wipe off dust and lightly sand the surface.
Some homeowners skip the wall putty step and go straight to paint. This is a critical mistake. Wall putty fills minor imperfections, dents, and cracks. It ends up giving your walls a smooth finish. Without it, you may end up having wall cracks and uneven surfaces.
Using too much primer can lead to dripping and slow drying. On the other hand, applying too little would not cover the wall effectively. Aim for a uniform coat. It is also advised to not thin or over-extend your brush, as it compromises coverage and bonding.
Primer can settle if it sits unused for a while. Always stir well before use to ensure the contents are properly mixed. Skipping this step can lead to inconsistent results. It may also result in uneven absorption and dull paint finishes.
Avoid applying primer in extreme temperatures. Specifically, do not apply primer when the ambient temperature is below 10°C. Moreover, if the temperature is expected to fall below the mentioned °C within four hours of application, avoid using the primer. Cold weather can prevent proper curing, leading to poor adhesion.
You must note that Primer is not paint. It is not meant to be tinted. Do not use stainers or colourants in your primer. This can affect its chemical structure and compromise its performance. Always use primer as is unless specifically instructed otherwise by the manufacturer.
Give your primer enough time to dry fully before applying paint. Rushing through the drying phase can trap moisture and cause paint to flake. Check the label for the recommended drying time.
Depending on the wall type and its porosity, one coat of primer might not be enough. Highly absorbent surfaces may require two coats. If you see the wall soaking up primer quickly or unevenly, an additional coat may be necessary for optimal results.
When it comes to long-lasting wall protection and a flawless finish, Birla White Primacoat Primer stands unmatched. It prepares your walls for a stunning paint job. Birla White Primacoat Primer seals the wall, improves paint adhesion, and enhances the true tone and vibrancy of the paint. The Primer prevents the peeling of the wall topcoat and increases the life of your walls. It can be clearly said that Primacoat provides the best possible opacity and whiteness needed to bring out the true colour tones of your wall paint.
Primers contain chemicals that require careful handling. Always follow safety guidelines to protect yourself and those around you:
• It can prove to be harmful if swallowed.
• In case of ingestion, seek immediate medical attention.
• If irritation develops or persists, wash skin with plenty of water.
• If symptoms continue, get medical help immediately.
_1.webp)
Follow the do’s and don'ts diligently to get the best results with Birla White Primacoat Primer.
Do’s:
• Ensure a clean, dust-free surface before application.
• Stir the primer well before use to ensure even consistency.
• Store in a cool, dry place away from direct sunlight and extreme temperatures.
Don’ts:
• Do not apply when ambient temperature is below 10°C or may drop within 4 hours of application.
• Do not over-thin or over-extend the brush. Follow dilution guidelines precisely.
• Do not use stainers or colourants. Use only as directed.
By avoiding common mistakes and using primer correctly, you create a wall that lasts. For more information, check out the Birla White official website.
Learn More: Your Solution to Perfect Walls: Choosing the Best Primer for Home Walls
