Loading
You’ve just finished plastering your walls, and everything looks smooth and flawless—until, a few weeks later, tiny cracks start appearing. No matter how carefully you applied the plaster, the cracks keep coming back, ruining the finish and leaving you frustrated.
Why does this happen? The answer lies in the plaster with cement itself. Traditional plasters—especially sand-cement mixes—lack the advanced engineering needed to withstand structural stress, shrinkage, and moisture absorption. Over time, these weaknesses lead to cracks, peeling, and even water damage.
The good news? Modern products are designed to tackle these exact problems.
But first, Let’s break down why traditional plaster fails and how you can prevent cracks for good.
Most wall plastering in India is done using a basic sand-cement mix. While this has been the go-to method for decades, it comes with several drawbacks:
1. Low Tensile Strength – The Main Culprit Behind Cracks
Traditional plaster has poor tensile strength, meaning it can’t handle expansion and contraction caused by temperature changes or building movement. When the structure shifts slightly (as all buildings naturally do), weak plaster develops hairline cracks that worsen over time.
2. High Shrinkage Equals to More Cracks
As cement plaster dries, it shrinks, creating internal stress. If the plaster isn’t flexible enough, this shrinkage leads to cracks—especially at joints and corners.
3. Poor Adhesion Leads to Peeling off of walls
If the plaster doesn’t bond strongly with the wall, it can peel or flake off (a problem called delamination). This happens when the adhesion strength is too low, causing hollow spots that eventually crack.
4. Water Absorption Weakens the Plaster
Standard plaster absorbs moisture, which seeps into the wall, causing efflorescence (white salt patches) and weakening the structure. Over time, this leads to dampness, mold, and cracks.
The solution? A high-performance, polymer-modified ready-mix plaster like Birla White Levelplast, which is engineered to prevent cracks at every stage.
1. High Tensile Strength – Resists Structural Stress
Unlike traditional plaster, Birla White Levelplast has exceptional tensile strength, meaning it can flex slightly with building materials without cracking. This makes it ideal for wall-to-wall plastering in both new and old constructions.
2. Polymer-Modified Formula – No Shrinkage Cracks
Thanks to its polymer-enhanced composition, this ready-mixed plaster undergoes minimal shrinkage, eliminating the micro-cracks that form in conventional cement plaster.
3. Superior Adhesion – Sticks Stronger, Lasts Longer
With high adhesion strength, Birla White Levelplast bonds tightly to walls—whether brick, concrete, or blockwork—preventing peeling and hollow patches.
4. Low Capillary Absorption
Unlike traditional plaster with cement, this advanced formula has low water absorption, preventing moisture damage, efflorescence, and dampness.
5. Higher Compressive Strength – Handles Heavy Loads
Whether you’re installing tiles or heavy wall fixtures, this plaster’s high compressive strength ensures a durable, long-lasting surface.
Cracks in plaster aren’t just a cosmetic issue as they can lead to structural damage, water leaks, and costly repairs. By choosing an engineered plaster like Birla White Levelplast, you ensure a strong, durable, and crack-free finish that lasts for years.
Next time you plaster your walls, don’t settle for outdated methods. Upgrade to a high-performance plaster that actually works—because your walls deserve better.
Visit https://www.birlawhite.com/en/plaster/levelplast for more!
