Question 1

What is TileLynk grout?

Accepted Answer

TileLynk is cement based joint filling material for tile/stone joints, used in internal & external floor and wall areas.

Question 2

Why is it called a TileLynk, un-sanded grout?

Accepted Answer

It is called un-sanded as it is advised to be used to fill narrow joints up to 6mm width.

Question 3

What is the pack size of TileLynk grout?

Accepted Answer

TileLynk is available in 1 Kg pouch.

Question 4

Where can I use this grout?

Accepted Answer

You can use TileLynk grout for internal and external areas like residential, commercial, industrial floors and walls to install in the joints of ceramic/vitrified/glass mosaic tiles and engineered marble/quartz stones, natural stones etc.

Question 5

What is application process of TileLynk grout?

Accepted Answer

Please refer the TileLynk Product brochure for detailed application procedure.

Question 6

What are the precautions to be taken while applying TileLynk grout?

Accepted Answer

The following precautions are very important and critical while application of TileLynk grout:Don’t mix with dirty water. Always use clean potable water for to mix with the powder.Do not mix the grout in dirty pails, buckets. Always use clean pail to get the best results.If the temperature is too low (Below 12 Degrees Centigrade), use heaters to increase the temperature while installing grout. If the temperature is too high (more than 35 Degrees Centigrade), use cold water or work during the evening/night/early morning to get best results.Don’t use putty blades for application of grout: Putty blades are metallic blades which will leave scratches on the tile surface. ALWAYS USE RUBBER FLOATS so that the tile doesn’t get scratched.Don’t allow any other works like plumbing, electrical fittings, plastering, tiling or painting to be done in the grouting area while applying the grout. If there is dust in the air, it settles down on the grouted joint which will be difficult to remove. Don’t allow any traffic other than people who are working with grout.Start initial cleaning with a white sponge in about 30 – 45 minutes time from the time of filling up of joints. Final cleaning must be carried out after 24 hours from the time of first cleaning.Always use potable quality clean water for first and final cleaning of the grout joints

Question 7

When can I allow foot traffic and heavy traffic on floor joints filled with TileLynk grout?

Accepted Answer

Foot traffic is allowed after 24 hours from the final cleaning of the grout. Heavy traffic is allowed only after 7 days from the day of final cleaning of grout joints.

Question 8

What is the minimum size and maximum size of joint that can be filled using TileLynk grout?

Accepted Answer

The minimum width of joint should be 1mm and maximum size (width) of joint should be 6mm for installation with TileLynk grout.

Question 9

What are the advantages of TileLynk grout?

Accepted Answer

The advantage is it is stain resistant, flexible and easy to apply besides being very economical. Besides this, it does not crack, powder or disintegrate with time. It can be safely used on external facades, un-covered terraces, interior walls and floors.

Question 10

What is the shelf life?

Accepted Answer

12 months for a sealed pack when stored under cover, out of direct sunlight, in damp-proof conditions, and protected from extreme temperatures.

Want your tiles to look as good as your walls?

TileLynk: Finish so smooth, your tiles will thank you for it!

More reasons to choose TileLynk

Areas of Application

Gallery

Available Sizes

Product Brochure

Technical Specification

Your questions, Now answered!

Find a store near you

Blogs

What Really Holds Tiles Together: A Deep Dive into Tile Adhesives & Fixing Systems

What Is Tile Adhesive Made Of? Understanding Its Key Ingredients

Cracked Tile Joints? Here’s How the Right Tile Grouting Fixes It

Adhesives for Tiles in Wet Areas: What You Must Know Before Installing in Bathrooms and Kitchens

What's the best way to make sure your tiles don't come loose from all the moisture?

We promise to give you beautifully white walls.