Birla White Ever-White Cement Wash

Your go to cement wash if you want Safedi Bemisaal Jo Chale Saalo Saal

Loading

Birla White Ever-White Cement Wash

Your go to cement wash if you want Safedi Bemisaal Jo Chale Saalo Saal
Overview
Birla White "Ever White Cement Wash" is a first-of-its-kind cement wash that is exceptionally durable, superbly lustrous, and gives an economical wall finish. It is far more superior and lasts much longer than ordinary Lime Wash.
Gallery
Product Highlights
Excel putty with Germ protection & Silver Ion Technology
Silver Ion Technology
Anti-viral, Anti-bacterial, Anti-fungal and Anti-algae
Features
  • Fills minor pores/pin holes, hair line cracks, and crevices
  • Superior White Finish
  • Smooth Matt finish
  • Applicable on damped/moist surfaces
Benefits
  • Does not peel or flake nor gets washed away
  • Provides durability for up to 3 years
  • Gives additional strength to the surface
Applications
  • Interior walls
  • Exterior walls

Tech Specifications
Sr.No Technical Parameter Specifications Test Method
1 *Coverage (Sq.ft/Kg/two Coat) [On Ideal smooth surface] 38-42 In-house
2 Pot life (Hours) 1.5-2.0 In-house
3 Drying time @ 25±2 ºC
-Touch Dry
-Hard Dry
Max 1 hrs.
Min. 6 hrs.
In-house
In-house
4 VOC (mg/kg) Nil ASTM 6886
5 Bulk Density (g/cm3) 0.90-1.0 In House
*This value is on smooth surface, however this may change according to surface texture.
Enquire Now Download Brochures
Available Pack Sizes
Frequently Asked Questions
Birla White Ever-White Cement Wash is a white cement-based water thinnable product. It is ideal for two coat applications on new interior/ exterior plastered wall and Concrete/RCC surfaces.
Birla White Ever-White Cement Wash comes with the triple promise of being highly durable, gives superior Whiteness and an economical wall finish. It also fills all minor hairline cracks and crevices to provide a smooth matt finish. Birla White Ever-White Cement Wash is the first-of-its-kind product that lasts longer than ordinary cement wash & lime wash and provides a far superior whiter finish on substrate.
Yes, Birla White Ever-White Cement wash requires water curing for minimum 3-5 days (2-3 times daily according to the weather condition)
Minimum 2/3 coats of Birla White Ever-White Cement Wash are enough to get a smooth matt finish. But if it is used as an undercoat, a single coat is sufficient.
The base surface should first and foremost be free of dust, grease, laitance etc. Before the application of Birla White Ever-White Cement wash, remove all loosely adhering material, dirt, dust & oil etc. from the surface/wall by using emery/sandpaper, blade or wire brush etc. Pre-wetting is important step before application of Birla White Ever -White Cement Wash to get better workability, coverage & higher bond strength with the surface.
Ideally, it is not recommended. But if you do have to apply it on any painted surface, make sure you have prepared your surface thoroughly by removing all loosely/intact old material. This shall enable the Birla White Ever-White cement wash coat to have strong bond with the base substrate.
Mixing ratio (1:1.2): Slowly add 1 kg of Birla White Ever-White Cement Wash with 120% clean water (1 Kg Birla White Ever-White Cement Wash +1200 ml water) to make homogeneous slurry.
Mixing should preferably be carried out by mechanical stirrer (3-5 minutes)/for 10-12 minutes by manually to obtain a homogeneous consistency. Prepared slurry should be used within 1.5-2 hours.
After thoroughly mixing apply Birla White Ever-White Cement Wash on the moistened/wet wall/surface uniformly with the help of painting brush (4 or 5 inch)/appropriate Roller. For obtaining best results, after each coat spray water at the surface after 6-8 hours of drying to cure the surface properly. Let the surface dry for 24 hours or atleast overnight before the application of the second coat.
While applying Birla White Ever-White Cement wash, you have to first ensure that the wall surface is pre-wetted. Only a limited quantity of mix should be prepared which can be used within 2 hours, to ensure that the mix does not set before application. It is advisable to avoid application at high temperature, as cement will set faster leaving brush marks on the surface. A gap of 24 hours between two coats of Birla White Ever-White Cement Wash is recommended.
The coverage depends upon the nature & texture of substrate/surface. If the substrate is porous, it will be less, and vice versa. Usually, 1 kg of Birla White Ever-White Cement wash will give 3.5 square meter to 3.9 square meter per two coats on an ideal smooth substrate/surface.