It is a high polymer modified & highly flexible adhesive with enhanced properties of slip resistance, extended open time & excellent bond strength which is necessary for fixing large format tiles/ natural stones & slim tiles on vertical & horizontal surface for indoor as well as outdoor application especially in external conditions & on substrates subject to deformations/ vibrations.
ഗാലറി
Weatherproof bonding
High-end tiling finish
Exterior vertical bonding
Picture perfect tiling
Superior grip technology
Designer level results
ഉൽപ്പന്ന സവിശേഷതകൾ
സവിശേഷതകളും ആനുകൂല്യങ്ങളും
Highly Polymer modified – excellent bond strength at different conditions
Extended open time - suitable for large format & external condition
Sag-resistant formula for vertical walls
Water & shock resistant - suitable for wet areas & commercial floor too
Sustains heat ageing – Ideal for external & high temperature applications
Indoors and Outdoors on horizontal & vertical surfaces
Tile-On-Tile application
Used for natural stones, Vitrified tiles, Porcelain tiles of all formats
സബ് സ്ട്രാറ്റ്
CEMENT-BASED SCREEDS & MORTARS
GYPSUM & CEMENT-BASED PLASTERS/ RENDERS
CONCRETE SURFACES
BRICKS MASONRY
AAC BLOCKS
WATERPROOFING PRODUCTS
CEMENT TERRAZZO
EXISTING VITRIFIED TILES & CERAMIC TILES
EXISTING NATURAL STONES
ANOTHER CEMENT-BASED SURFACE
DRYWALL LIKE CEMENT /BISON/ GYPSUM BOARDS
ഉപരിതലം തയ്യാറാക്കൽ
All surfaces should be between 40° F(4°C) and 104° F(40°C) and structurally sound, clean and free of all dirt, oil, grease, loose peeling paint, laitance, concrete sealers or curing compounds. Check the surface to be true to plumb.
All slabs must be plumb and true to within ¼” (6mm) in 10 ft (3m). Rough or uneven concrete surfaces should be made smooth with Screed/Plaster material to provide a wood float (or better) finish.
Dry, dusty concrete slabs or masonry should be dampened, and excess water swept off.
Installation may be made on a damp surface. New concrete slabs shall be damp cured and 28 days old before application.
Expansion joints to be provided & filled with suitable sealant.
Do not cover expansion joints with thin set tile adhesive/ tile.
Surface to be cleaned and roughened before installation of tiles or stones.
ആപ്ലിക്കേഷൻ പ്രോസീജർ
Coverage:
Approx. 60-70 ft2/ 20 Kg bag at 3 mm thickness using 6 mm x 6 mm square notched trowel. *Coverage will vary depending on trowel notch size, type and size of tile and substrate smoothness and evenness.
ഗ്രൗട്ടിംഗ്
Grouting should be carried out after 24 hours of tiling. Use the appropriate grouting material from Birla White range of tile grouts.
Properties
ഷെൽഫ് ലൈഫ്
12 months for sealed pack when stored under cover, out of direct sunlight, dampproof condition and protect from extremes of temperature
There is no particular Tile Adhesives for single application as Tiles come in diverse types, sizes, and materials, each requiring specific adhesive properties for optimal bonding.
Rest assured, Birla White has launched best tile adhesives for fixing tiles anywhere with its white cement advantage.
Birla White Uses State of art technology and German modified polymer technology, which provides best in class and industry outstanding Tile Adhesives with the help of White Cement Advantage which provides strong bonding with substrate and long lasting elegance to the floor and wall.
Yes, Birla White Tilestix tile adhesive is a better choice than cement for tile installation. Tile adhesives have specific properties that offer improved bonding, flexibility, and resistance to the tile installation that secures tile application. Birla White TileStix tile adhesives also ensure easy workability and provide a seamless result compared to traditional cement mortar.
TileStix Extero Grip+ is high polymers and cement based thin set adhesive which is mixed with water and used for tile / stone installation in internal and external areas. It can be used for Tile-on-Tile applications as well.
You can use TileStix Extero Grip+ for internal and external areas like residential floors, walls to install ceramic / vitrified/ glass mosaic tiles at any height. It can also be used in Submerged areas like swimming pools. TileStix Extero Grip+ can used in area with high vibrations like escalators, lifts.
For 20 Kg bag of TileStix Extero Grip+, one needs 6 to 6.4 Liters of water. Mix water depending upon the consistency of mix required and ambient environmental conditions.
The maximum size of tile is 2400mm X 1800mm for installation with TileStix Extero Grip +.
Yes. For external tile installations, the thermal stresses are critical and would need adhesive to become accommodative to the movements arising from these stresses. TileStix Extero Grip+ has the ability to accommodate such movements.
Yes, TileStix Extero Grip+ can be used to fix natural stones. It is white cement based adhesive and hence does not stain light coloured stones.
You can install tiles at any height using TileStix Extero Grip+
If the engineered stones / Agglomerates / Quartz stones have to be installed on floors, you may use TileStix Extero Grip+.
No. It is mandatory to have spacing between the tiles when installed on external façade or floors. The thermal movements are very high and spacers are must to accommodate such movements.
ബ്രോഷറുകൾ ഡൺലോഡ് ചെയ്യുക
