Loading
You would love your walls to reflect a beautiful, aesthetic vibe. But what happens when unsightly zigzag cracks creep in and ruin that picture-perfect vision? Nothing spoils the charm of a well-designed wall faster than those unwanted lines. You know what’s worse? Water seeping through these cracks. It is not just unpleasant to look at, but it can damage your space over time. Don’t worry though. We have listed out effective solutions to fix those cracks and stop that frustrating leakage.
.webp)
Here are the top 5 wall leakage solutions for the issue at hand. These will not only help prevent cracks and seepage but also ensure long-term protection for your walls.
Cracks in walls or ceilings are the most common entry points for water. Using a high-performance crack seal waterproofing compound effectively seals both visible and hairline cracks. One such solution from Birla White’s Seep Guard range is Crack End. It is a white cement-based powder crack filler. The product offers a smooth finish, is water-resistant, and effectively prevents further seepage through minor structural cracks. Therefore, you will not only get sealed cracks but also long-lasting protection from such damage.
Flat roofs and terraces are directly exposed to rain and sunlight. This makes them vulnerable to water leakage and thermal expansion. Seep Guard Horizontal Surfaces from Birla White is specially designed to tackle such challenges. Applying such a specialized terrace waterproofing coat provides a protective barrier against water, UV rays, and heat.
Exterior walls absorb a significant amount of rainwater, especially if they are not protected. Applying a waterproof solution forms a waterproof layer that prevents water from seeping in. Go for a trustworthy product like Seep Guard Vertical Surfaces that offers a robust waterproofing treatment specifically formulated for external walls. It creates a water-resistant barrier that prevents moisture absorption while offering anti-fungal, anti-algae, and UV-resistant properties.
To prevent paint from peeling due to dampness, it is essential to prepare interior walls with a waterproof base coat or primer. Seep Guard Interior Surfaces is an advanced waterproofing solution that forms a protective base coat on internal walls. This waterproofing solution seals porous surfaces, resists efflorescence, and stops water from traveling inward. It also enhances paint durability and improves overall wall hygiene.
Leakages from faulty plumbing lines, especially in bathrooms and kitchens, are a major source of seepage. Timely grouting and sealing of pipe junctions, tile gaps, and sanitary fixtures can prevent water from seeping through. Regular maintenance and early detection of leaks are key to avoiding major damage.
Water leakage is one of the most common and stubborn issues that homeowners face. Whether it is damp patches on interior walls or visible seepage, the damage can be long-lasting. However, only a few products offer lasting protection for interior vertical surfaces. This is where Birla White Seep Guard Waterproofing Solution stands out.
%20(2).webp)
Designed specifically for wall waterproof needs, Seep Guard is the most reliable and effective product in its category. Its unique formulation combines waterproofing, crack-bridging, and anti-efflorescence properties in one powerful solution. These features make it the best waterproof solution for interior vertical surfaces. Birla White Seep Guard is the most efficient product in comparison to other types of waterproofing solutions.
For optimal performance and long-term protection, follow the correct application method step-by-step. Here’s how you can ensure the best results:
Start by preparing the surface thoroughly:
• Remove all loosely adhering material such as dirt, dust, oil, organic solvents, or curing compounds using a chisel, wire brush, or emery paper.
• If there is any efflorescence, clean the area thoroughly to eliminate loose particles.
• Wash the surface with clean water and allow it to dry completely before beginning the application.
• Fill surface cracks (less than 3 mm wide) using a high-quality crack filler. For deeper cracks, damaged portions, or hollow areas, use Birla White Levelplast, to repair the surface completely.
• In a clean container, slowly add 1 kg of Birla White Seep Guard to 1000 ml of clean water to create a smooth slurry.
• Allow the mixture to rest for about 5 minutes after thorough mixing. This activates the formula for maximum effectiveness.
• Use the prepared slurry within 1 to 1.5 hours.
• Apply the priming coat evenly over the dry, pre-cleaned surface using a standard paint brush. This enhances adhesion and sets the base for the following coats.
• For the main application, mix 1 kg of Birla White Seep Guard with 600-650 ml of clean water to form the final slurry.
• Mix for 3-5 minutes using a mechanical stirrer for best consistency.
• Apply the first coat uniformly using a brush in one direction.
• Allow a drying interval of 4 to 6 hours before applying the second coat.
• Apply the second coat in a crosswise direction to the first coat to ensure full coverage and better bonding.
Note: The total thickness of both coats should not exceed 1.5 mm.
Birla White Seep Guard Waterproofing Solution is easy to apply, long-lasting, and eco-friendly. It is a reliable remedy for vertical wall leakage and dampness. For more wall care solutions, visit the official website.
Also Read: The Dangers of Ignoring Wall Dampness and Leakage: Top Solutions for Wall Water and Roof Seepages
