Seep Guard Crack End

ಅವಲೋಕನ
ಗ್ಯಾಲರಿ
ಉತ್ಪನ್ನ ಮುಖ್ಯಾಂಶಗಳು
ತಾಂತ್ರಿಕ ವಿಶೇಷಣಗಳು
ಎಫ್‌ ಅ ಕ್ಯೂ
ಯಸ್‌ಕೆಯುಸ್

Birla White Seep Guard Crack End is a high-performance, polymer-modified, white cement-based crack filler designed to seal non-structural cracks with superior bonding and water resistance. Whether it’s during waterproofing or repainting, Crack End ensures a smooth, ready-to-paint surface, improving finish quality and longevity.

ಗ್ಯಾಲರಿ

Flawless crack-free walls

Smooth walls, stunning interiors

Long-lasting crack position

Smooth application, smooth result

Engineered for wall protection

Interior walls, protected for years

ಉತ್ಪನ್ನ ಮುಖ್ಯಾಂಶಗಳು

ವೈಶಿಷ್ಟ್ಯಗಳು ಮತ್ತು ಪ್ರಯೋಜನಗಳು

Polymer modified formulation for enhanced crack bridging
Ready to use powder requiring only onsite water addition.
Water based stainers can be added to the powder.
Provides a smooth finish during repainting.
Efficient and long-lasting crack sealing of non-structural cracks

ಅಪ್ಲಿಕೇಶನ್‌ಗಳು

Fills cracks upto 5 mm
Levels uneven walls and ceilings before painting.
Gives a smooth finish on brick and plastered surface

ಟೆಕ್ನಿಕಲ್ ವಿಶೇಷಣಗಳು

Sr.No	ಟೆಕ್ನಿಕಲ್ ಪ್ಯಾರಾಮೀಟರ್	Results
1	Appearance	Whitish Powder
2	Powder : Water (By Volume)	3:1
3	Shrinkage visual rating on 5mm groove (R=1 high shrinkage, R= 10 Very low Shrinkage)	10
4	Pull off adhesion, N/mm2, 28 days	1.15
5	Compressive Strength, N/mm2, 28 days	22.7
6	Flexural Strength, N/mm2, 28 days	7.96
7	Coverage/kg in 5 mm * 5 mm Groove (linear Meter)	18-20
8	Pot Life, Hrs	2
* This value is on ideal concrete surface, this may change according to surface pattern/texture

ಕೈಪಿಡಿಗಳ ಡೌನ್‌ಲೋಡ್‌

ಶೆಲ್ಫ್ ಲೈಫ್

Shelf Life is 12 months from the date of manufacturing

ಪದೇ ಪದೇ ಕೇಳಲಾದ ಪ್ರಶ್ನೆಗಳು

ಎಲ್ಲವನ್ನೂ ತೋರಿಸು

Yes, Crack End is designed to work effectively on both interior and exterior walls, providing a durable and water-resistant finish.

Yes, once applied and cured properly, Crack End creates a water-resistant barrier that helps prevent seepage through cracks.

Crack End is ideal for non-structural surface cracks up to 5 mm wide on interior and exterior walls. For structural or deeper cracks, we recommend consulting a civil work expert before application.

No, Crack End has an anti-shrink formula that resists cracking after drying, ensuring the repaired area remains intact.

Yes, after the product has dried completely (usually within 6–8 hours), you can apply paint or a waterproof coating over the surface.

Coverage depends on the width and depth of the cracks. On average, a 1 kg pack covers approximately 60-65 running feet of cracks (at 5 mm width and depth).

Seep Guard Crack End is available in convenient packs of 1kg and 5kg.

ಲಭ್ಯವಿರುವ ಪ್ಯಾಕ್ ಸೈಜ್ ಗಳು