Buy on Amazon
Enquire Now
Seep Guard Crack End
Birla White Seep Guard Crack End is a high-performance, polymer-modified, white cement-based crack filler designed to seal non-structural cracks with superior bonding and water resistance. Whether it’s during waterproofing or repainting, Crack End ensures a smooth, ready-to-paint surface, improving finish quality and longevity.
கேலரி
Flawless crack-free walls
Smooth walls, stunning interiors
Long-lasting crack position
Smooth application, smooth result
Engineered for wall protection
Interior walls, protected for years
புராடக்ட் ஹைலைட்ஸ்
smooth-finish
super-adhesion
water-resistant
சிறப்பம்சங்கள் மற்றும் பலன்கள்
  • Polymer modified formulation for enhanced crack bridging
  • Ready to use powder requiring only onsite water addition.
  • Water based stainers can be added to the powder.
  • Provides a smooth finish during repainting.
  • Efficient and long-lasting crack sealing of non-structural cracks
உபயோகம்
  • Fills cracks upto 5 mm
  • Levels uneven walls and ceilings before painting.
  • Gives a smooth finish on brick and plastered surface

டெக் ஸ்பெஸிஃபிகேஷன்ஸ்
Sr.No டெக்னிக்கல் அளவுகள் Results
1 Appearance Whitish Powder
2 Powder : Water (By Volume) 3:1
3 Shrinkage visual rating on 5mm groove (R=1 high shrinkage, R= 10 Very low Shrinkage) 10
4 Pull off adhesion, N/mm2, 28 days 1.15
5 Compressive Strength, N/mm2, 28 days 22.7
6 Flexural Strength, N/mm2, 28 days 7.96
7 Coverage/kg in 5 mm * 5 mm Groove (linear Meter) 18-20
8 Pot Life, Hrs 2
* This value is on ideal concrete surface, this may change according to surface pattern/texture
Enquire Now ப்ரௌச்சரைப் பதிவிறக்கம் செய்யவும்
வைத்திருக்கும் காலம்
Shelf Life is 12 months from the date of manufacturing
அடிக்கடி கேட்கப்படும் கேள்விகள்
Show All

Yes, Crack End is designed to work effectively on both interior and exterior walls, providing a durable and water-resistant finish.

Yes, once applied and cured properly, Crack End creates a water-resistant barrier that helps prevent seepage through cracks.

Crack End is ideal for non-structural surface cracks up to 5 mm wide on interior and exterior walls. For structural or deeper cracks, we recommend consulting a civil work expert before application.

No, Crack End has an anti-shrink formula that resists cracking after drying, ensuring the repaired area remains intact.

Yes, after the product has dried completely (usually within 6–8 hours), you can apply paint or a waterproof coating over the surface.

Coverage depends on the width and depth of the cracks. On average, a 1 kg pack covers approximately 60-65 running feet of cracks (at 5 mm width and depth).

Seep Guard Crack End is available in convenient packs of 1kg and 5kg.
கிடைக்கும் பேக் அளவுகள்
Seepguard crack end available sizes