Loading
The technology used to manufacture this product is ‘Patent Pending’.
Sr.No | ಟೆಕ್ನಿಕಲ್ ಪ್ಯಾರಾಮೀಟರ್ | ವಿಶೇಷಣಗಳು | ವಿಶಿಷ್ಟ ಶ್ರೇಣಿ | ||
---|---|---|---|---|---|
1 | *Coverage (sqft/Kg/coat) [On Ideal smooth surface] |
Designer Roller Finish : 06-10 Sponge Roller Finish : 08-12 Spray Finish :15-20 |
In House | ||
2 | Pot life (Hours) | 1.5-2.0 | In House | ||
3 | Tensile strength (@28 days) (N/mm2) | ≥0.5 | EN 1348 | ||
4 | Water Capillary Absorption (ml), 30 min @28days | ≤0.60 | Karsten Tube | ||
5 | Bulk Density (g/cm3) | 0.9-1.1 | In House | ||
* This value is on smooth surface; however, this may change according to surface texture |
Surface Preparation: Remove all the loosely adhering material like, dirt, dust & oil etc. from the Surface by using suitable emery paper, putty blade or wire brush etc. Surface imperfections such as holes, dents and cracks should be filled before application of Textura Roller/ Spray finish.
Surface Pre-Wetting: Pre-wetting is important before application of “Textura Roller Finish” on concrete/Plaster surface to get best smoothness, workability, coverage & higher bond strength with the applied substrate.
Mixing of “Textura Roller Finish and Spray Finish”
Mix Textura-RF thoroughly to get uniform paste formation according to given water ratio for different finish which results in obtaining more coverage & smooth uniform shade. Only prepare a quantity which can be used within 1-2 hours of mixing with water.